1 / 3
3D Printable Windmill
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The windmill can have two or four blades and is easy to assemble.
- Ocena
- 4,667 / 5
- Polubienia
- 14
- Pobrania
- 90
- Wydruki
- 3
- Wyświetlenia
- 727
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (17)Powiązane
A printable windmill.
Windmills can be configured with two or four blades and are easy to assemble.
This is a windmill that can be attached to a plastic bottle and placed anywhere.
How to assemble
Please assemble by referring to the photo.
See details below for blade assembly.
How to assemble ２blades
- Insert the blade body into the hole in the center of the blade, rotate it 45 degrees and place it on the edge.
- Insert the end of the blade into the blade body, rotate it 45 degrees, and place it in the position shown in the photo.
How to assemble ４blades
- Insert the blade body into the hole in the center of the blade, rotate it 45 degrees and place it on the edge.
- Insert the end of the second blade into the blade body and place it in the position shown in the photo.
- Insert the blade body into the hole at the end of the first blade and place it in the position shown in the photo.
- Insert the blade body into the center hole of the second blade and place it in the position shown in the photo.
- Make sure the blades are twisted in the same direction.
