Remix of Kumiko Tea Light Lantern 3 for 38mm Tea Light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tea light holder
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a remix of Kumiko Tea Light Lantern 3.
The walls and top were printed with a concentric pattern on the bottom and top layers to accentuate the design. The filament I used was Printlife Pro PLA Green. Most of the printing was done on a CR10 mini, modified with dual Z-axis, direct drive extruder, 0.6 steel nozzle, and polypropylene plate. The parts were sliced in Cura 5.8.0, 0.30 layer height, temperature 210°, bed temperature 60°, 15% grid infill. The diffuser was printed in vase mode on a MK3s+, modified with a dragon hotend; 0.20 layer height, 0.4 nozzle.
Print times: Wall(s)-2 hrs, 1 min each (8hrs, 4 mins total); Top-1 hr, 8 mins; Bottom-1 hr, 38 mins; Diffuser-2hrs, 50mins.
I glued parts together with a mixture of Elmer's wood and regular glues.