1 / 1
TPU 40D /FLEX Feet for Original Prusa Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Substitute for originial Foam feet for Original Prusa Enclosure
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
I had problem with original foamy feet for Original Prusa Enclosure witch they just ended their life :( . So I did make substitute for them for fast repair.
I made them little higher then original feet.
Original foam feet were 8mm.
This model is 10mm height
I used filamen flex / tpu 40D.
Print settings :
30% infill gyroid and nothing more :).
Hope you will like that small model witch prints fast :)