Quick Release Whistle Buckle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick release buckle with whistle for hiking or hydration packs with straps 28mm or less in width.
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 334
- Wydruki
- 2
- Wyświetlenia
- 1495
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
You can replace a standard quick release buckle with this one in order to have a built-in safety whistle. Can be printed at smaller sizes, but this is untested. Designed to be printed without supports. The whistle portion is based on the “Emergency & Sports Whistle” originally created by Scarlet_Engineering. It's not a perfect whistle, but it works for non-emergencies. You may need to adjust where your layer lines fall in order to maintain your whistle's tone.
I've printed these buckles with a 1.2mm shell and 0% infill at 60mm/s speed on an Ender 3 S1. You can probably print much faster than that on a more advanced printer!
There are some vertical lines on the front and back of the whistle portion that may be fixable with a different slicer or print settings.