HCWS - Standard Lab Slide Glass Drying Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remixed design
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is for the Honeycomb Wall Storage System -
This is for designed for standard lab glass slides that are used with a microscope. The Flats have ridges to hold the Slides securely, but also allows for air flow for quick drying.
Printed out of PETG for Chemical resistance.
Will Print a 0.2mm - But 0.15mm is the recommended layer height.
Print on the front face down, with Standard supports, build plate only. Using tree supports will have the “branches” going into the comb and cause undesired breakage.
*The Picture show's what it looks like and that it can be printed. I ran out of white filament during the print and had to switch to black. Will Post another Picture when my roll of White come in.