Shimano Altus shifter extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extension for Altus SL-M370 3x9-speed shifting lever
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After I upgraded my breaks to the current deore generation, I couldn't reach my shifting levers due to the changed clamp position.
This extension extends the lever by about 18mm. Installation is a bit fiddly, but once in place, it should click in place without any glue. Therefore it can also be removed without any problems.
Note: This model was made for the old generation altus SL-M370 and probably won't fit the current SL-M2000 version. But feel free to test and leave a comment if it worked ;)
I printed this in original orientation with full supports. Organic supports worked best for me.
Print in a UV-resistant material like PETG or ASA. PLA or ABS likely won't last long.