1 / 3
Gauge 1 Axle hung motor with N20 motor — zdjęcie 1
1 / 3

Gauge 1 Axle hung motor with N20 motor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A realistic axle hung motor for gauge 1 (45 mm track).

Ocena
0 / 5
Polubienia
10
Pobrania
133
Wydruki
0
Wyświetlenia
552
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model is my attempt to make a realistic axle hung motor for gauge 1 (45 mm track). The propulsion is done with an N20 geared motor. The axle is a 3mm rod. 2 MRZZ63 bearings are inserted in the main housing as axle bearings. An M2 bold is used to fasten the N20 motor in the main housing and can be used to fix the assembly to the locomotive. Additionally two small M2 bolds are used for closing the gearbox cover.

Tagi