Pixel Watch 2 / 3 (41mm) Charging Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A convenient TPU-based Charging Stand for the Google Pixel Watch 2 or Pixel Watch 3 (41mm)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A convenient little Charging Stand for the Pixel Watch 2 or 3 (41mm). Just insert the Charging Puck as shown in the images, place it on your desk and plug it in.
The Stand is contoured such that you can basically drop the Watch on to it, with the crown in the notch, and it will sit in just the right place to connect to the charging pins - no fiddling around to position it correctly. No need to remove the band either.
Printing
It is designed to be printed in 95A TPU (pretty standard) so that it can hold the Puck firmly in place. I used 3 walls, 3 top surfaces, 5 bottom surfaces (to firm up the base) and 15% 3D infill at 0.2mm layer height. Other setting will very much depend on your printer and the filament you are using.
Note: This is for the Pixel Watch 2 or Pixel Watch 3 (41mm), for the Pixel Watch 3 (45mm) see here.
If you find this model useful then please:
EdinBearDragon