Build Plate Holder - Under Desk/Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and adaptable system for maintaining your building plates. Screwable under your desk or shelf or wall mountable
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple and adaptable system for keeping your construction dishes.
The two pieces are printed separately, so you can store plates of any size (minimum size 40mm).
You can keep up to 3 different building plates easily under your handy desk or under a shelf.
If you have space you can print 2 adapters to mount it to the wall at a 3-degree angle.
Recommended screw: maximum head diameter: 6.5mm (example in the last picture)
Print files in 3mf and stl format are provided.
Optimal printing parameters are already set in the 3mf format.
In case stl format is used, the following parameters are recommended:
infill: gyroid
wall loops: 3
Bottom layers: 4
If necessary add brim for edge adhesion:
OrcaSlicer: mouse ear
brim ear max angle: 180
brim ear detection radius: 0
Printed in PLA Sunlu Meta. If installed in places highly exposed to sun and heat it is recommended to use PETG or even better ABS.