Modular pan or plate rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Save space and keep your plates and pans upright with this modular rack.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 480
- Wydruki
- 5
- Wyświetlenia
- 1617
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I created this modular rack system to save space in my tiny kitchen. I installed it in a bottom cabinet where my nice pans and lids were getting tossed on top of each other every time my S.O. would empty the dish washer.
The “rack” as I called it, has a doweling mechanism to keep them in a straight line (pictured). I have a couple small holes on each rack that is clearance for a screw and head. I imagine 3M tape or similar would work fine also to mount it. The rack also holds the uprights at an 5° angle.
To get the spacing in-between racks correct, put 2 of the “upright” in two of the of the “rack” pieces and then screw it down.
The spacing is a little over ½" inch apart, so you can fit any pan size. The “upright” is an “M” shape to accept handles on the lids.
Printed with PLA, .4mm nozzle, 3 wall layers with 20% infill on a MK4.
Thanks for looking :)
Trent