Holder for airbrushes with MAC valves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamps directly to common air compressors.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I love the original model by Tanth, which keeps the paint cup upright and works wonderfully with airbrushes that have a MAC valve at the tip.
I need to clear my hobby table after every session, which makes setting up a clamp, compressor and air hose each time a pain. With the holder mounted on a compressor, I can leave everything connected and slide them all under the table when I'm done. Also, when in use the airbrush is held super securely and off the tabletop entirely.
There are three different bracket mount positions, so pick the height that works best for you. In the low position, you can print without supports. I use the mid-mounted bracket, which keeps the top of my Neoeco NCT-SJ83 no higher than my compressor, but high enough that the air hose isn't kinked when stored.