Profile gauge 26cm using Action/Werckmann parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Longer version of profile gauge, using parts of two Werckmann/Action profile gauges
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a profile gauge from Action/Werckmann which can take profiles about 13cm wide.
For a project I needed to copy longer profiles and designed this double length 26cm frame.
I bought one extra profile gauge from Action and reused the fingers and some of the other parts.
Printing
I printed on a MK3.5 in ASA with 0.6 nozzle and 0.25mm layer height.
The inside corners of the end plate may need some cleaning up with a knife to fit well into the centre strip.
Assembly
You need two of the original profile gauges for parts: disassemble and save 3 screws, the lever, lever pin and the measuring fingers.
Push the end plate on the centre strip.
Transfer the measuring fingers to the new centre strip, add the lever and pin. Put everything in the frame and screw it together.
Any comments or suggestions for improvement are always appreciated.
Bart