Takara MC-06 Kronoform Desktop Registration
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minor changes to the original model to include registration holes for 1.75mm filament to line up parts when gluing.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
For the Arm and Lower Leg pieces, print two of each, then mirror the part and print two more each. Most slicer software should have that option available. The parts should print well in the orientation here, but do require supports for most of them. If printing with supports, use your slicer software to exclude the 1.75mm filament holes, so it doesn't add support material that's difficult to remove later.
Betus Car Dashboard Clock: https://www.amazon.com/Betus-Car-Dashboard-Digital-Clock/dp/B0FVRS65W2
10mm x 2mm Magnets: https://www.amazon.com/dp/B09YCQC2YF
The Chest Back Latches piece has spaces on the back for my giant watch strap desktop or wall mount: https://www.printables.com/model/978701-takara-mc-06-kronoform-robot-watch-strap
After printing, add a piece of filament into one half of each piece and test fit to make sure everything lines up. Then glue and assemble when completed!