4th Gen Toyota Tacoma (75111-AK010) Front License Frame Bracket Filler to mount on top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2024 Toyota Tacoma (75111-AK010) 4th Gen Front License Frame Bracket Filler to mount license plates and frames on on top
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 654
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My dad recently got a 2024 Toyota Tacoma and wanted to use his Forged Carbon Fiber License Plate Frame - 2 Holes Angled Bottom - Matte Finish from Carbon Fiber Gear. The inset of the oem Toyota front license frame (75111-AK010) does not allow the license plate to be used with the frame without being recessed. I created a filler to fill the gap in the Toyota license frame to let the carbon fiber license frame and plate rest on top it.
I placed the printed license filler in the license plate bracket and drilled (8) holes to fit the (8) M3x12mm countersunk flat head screws. I started with small drill bits and gradually drilled up to the 3mm.
I inserted the (4) M3x5x4 brass heatset inserts (Voron) in the back bottom supporting panels.
The side supporting panels were too thin to allow the use of heat set inserts. Initially, when making the support panels the hole placement was centered. When I lined up the holes after drilling, I noticed I needed to make a side thinner to have the holes line up better. I sanded my support panels to line up the screw holes. I have since revised the support panels so no sanding should be necessary.
You'll need to get ½" or 12-14mm longer screws for license plate installation.
Hardware and Materials:
(8) M3x12mm countersunk flat head screws
(4) M3x5x4 brass heatset inserts (Voron)