Takara MC-06 Kronoform Robot Watch Strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A giant watch strap and bracket to hold the Kronoform desktop robot. Can be used for desktop or wall mounting.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 602
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an accessory for the awesome Kronoform Desktop Clock https://www.printables.com/model/962592-takara-mc-06-kronoform-the-desktop-clock by @MaxSterling. I modified the back half of the watch model to add new connector slots so I could create this watch strap mount. My modified parts are here: https://www.printables.com/model/978596-takara-mc-06-kronoform-desktop-registration
I modeled this watch strap off of an eBay auction, since I've long since lost the one I had as a kid.
Assembly:
The main bracket can be printed in PLA, but the Latch Spring should be printed in PETG for best results. It should be springy enough to use, but not brittle over time. The Latch Spring will fit into the Bracket Bottom, then glue the Bracket Top onto it. Be careful to not get any glue on the Latch Spring part! You can press-fit the Latch Hooks into the provided slots of the Latch Spring, but you can also glue them in if they feel loose. Once the glue dries, pressing in on both sides of the PETG Spring will move the Latch Hooks, allowing the watch robot to attach or detach.
The watch strap pieces are split into several designs, all based on sections of the original watch strap. Print and assemble as many in whatever combination you'd like! Each piece has a hole through the connector section for a piece of 1.75mm filament, making them easy to put together. I highly recommend using PETG filament for the hinges to prevent it from getting brittle and breaking over time.
Mounting Options:
The bottom connector is angled enough that you can use it with the First Connector piece as a desktop clock. If you print enough pieces you can hook the strap together in the back, since the Buckle and Hole Connector pieces should fit together, for the most part.
Wall mounting has several options. You can use the First Connector Hanger piece, which has a hole on the back for mounting. You can use the slot in the back of the Strap Loop to hang on the wall. Or, you can use the top of the Buckle Body. The Buckle Body is probably the least stable option, but keeps the watch segments from flopping forward.
Parts:
Betus Car Dashboard Clock: https://www.amazon.com/Betus-Car-Dashboard-Digital-Clock/dp/B0FVRS65W2
10mm x 2mm Magnets: https://www.amazon.com/dp/B09YCQC2YF