Horizontal Stabilizer Tip for Rans S-21 Outbound
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative design with skin thickness step ready for match drilling and riveting on a Rans S-21 kit aircraft.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This was designed to replace the factory supplied horizontal stabilizer tips on a Rans S-21 kit aircraft. No supports required, internal geometry optimized for low weight and strength. Match drill the factory skin holes to this, glue rivet washers to the inside, and rivet.
This design is different (not better or worse) from the factory design or other aftermarket alternatives. Those designs were not referenced when creating this one. Only field measurements of an assembled horizontal stabilizer and elevator of a Rans S-21 during construction were used to create this design.