1 / 2
Guide for the filament. Направляющая для филамента. Neptune 4 — zdjęcie 1
1 / 2

Guide for the filament. Направляющая для филамента. Neptune 4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A plastic guide corner on the table. Направляющий уголок для пластика на столе.

Ocena
0 / 5
Polubienia
4
Pobrania
65
Wydruki
0
Wyświetlenia
505
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Now there is an advanced version of this model, it is 2 in 1! Press!

What to do with the original spool holder? Click and find out! Press!

A guide corner for plastic from the coil that stands on the table. You will also need a PTFE tube. Its length is at least 4 cm, and so you can stick 10 cm in and it will be generally good. It is attached to the standard holes.

Направляющий уголок для пластика с катушки что стоят на столе. Также понадобится птф трубка. Ее длина минимум 4 см, а так можно 10 см воткнуть и будет вообще хорошо. Крепится в штатные отверстия.

Tagi