Arresting case for the battery cap of the Tuya Smart Thermostatic Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suitable as a prevention of damage, breakage of the lid lock, or as a repair of an already broken lock. Holds the cap in
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I created a housing for the Tuya thermostatic head. Unfortunately, the locking cap is severely unfinished and breaks off very easily. If the lock breaks and the cap does not stay in place, there will be a power problem. In this case, simply remove the head from the heater and insert it into the housing, then insert the batteries, replace the original cap and screw in the nut that will hold it in place. Tried and tested, works perfectly…
Printing parameters:
WARNING! Use PETG material, I recommend layer height 0.2mm, (possibly 0.15mm), for screw cap (part "Nut") in slicer set 101% of size in all axes. For the "BODY" part I recommend using organic supports, only in the overhang part.
After printing, spray WD10 or WD dry Teflon into the thread and screw the cap carefully to stretch the thread!!!
THE QUALITY OF PRINTED PARTS STRONGLY DEPENDS ON THE QUALITY AND ADJUSTMENT OF THE PRINTER USED!!
The pictured model was printed on Prusa MK4 from white Prusament PETG.