1 / 3
3D Print version of the Mikrotik K-79 rackmount kit — zdjęcie 1
1 / 3

3D Print version of the Mikrotik K-79 rackmount kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rackmount ear design for mounting two Mikrotik RB5009 and L009UiGS routers.

Ocena
0 / 5
Polubienia
9
Pobrania
169
Wydruki
0
Wyświetlenia
524
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

A reproduction of the Mikrotik K-79 for two switches. It requires heat set nuts for M3 bolts. It's a tight fit so you need to use the thinnest possible nuts. You can just take the single model and mirror it on the X-Axis or there's a .3MF project for the MK4 with both objects.

I tend to use organic supports as they are the easiest to remove for this kind of design.

Tagi