Track holder for Philips Hue Perifo track lighting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wrapper to secure the connectors on Philips Hue Perifo track lighting
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
We live in an old house, built in 1675. Our roof timbers mean that our bedroom ceiling isn't anywhere near flat. We have a (very) large (and entirely unnecessary) Philips Hue Perifo installation on the ceiling, and there's a gap below one of the connection points.
This simple print allows us to place the thin component above the connector, at the ceiling, and secure the base piece into it.
It's a very personal “I needed something” project, but figured someone somewhere may also have the same requirement.
It's assembled using two M3x15 bolts, with two corresponding nuts. The holes for the nuts are countersunk.
Enjoy!