The Owl House Top Floor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the top floor of the Owl House from the show of the same name.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution
This is a model of the interior and exterior of the top floor of the Owl House.
This model combines with the two other floors for the complete Owl House.
| Dimensions | Length | Width | Height |
|---|---|---|---|
| entire house | 179mm | 176mm | 166mm |
| ground floor | 179mm | 172mm | 75mm |
| middle floor | 107mm | 154mm | 48mm |
| top floor | 103mm | 91mm | 80mm |
| tower | 103mm | 107mm | 282mm |
You can either print the rooms seperately (folder “Separate Rooms”), or print them all combined with the exterior (folder “Combined”).
Print time and weights are for the combined rooms.
With the separate rooms, the walls are printed lying flat on the print bed and have hinges to fold up.
With the combined rooms, the walls are printed seperately from the floor (which also includes some of the furniture).
The seperate rooms are closer to how they appear in the show. For the combined rooms, I had to make many adjustments to make everything fit and line up.
I was sadly unable to make the balcony line up.
Print Instructions
Combined Rooms
- toh_house-top floor walls
- 0.2mm layer height
- requires supports
- toh_house-top floor floor
- 0.15mm layer height
- no supports
- toh_house-top floor roof
- 0.2mm layer height
- organic supports
- Has a cut underneath the chimney so you can bend the roof when putting it on the house
Separate Rooms
- toh_house-edas room hinge
- 0.15mm layer height
- no supports
- toh_house-edas room roof
- 0.15mm layer height
- no supports
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#