Flashlight mounts for Helmets or Straps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quickly convert your flashlight into a headlamp or mount it to your helmet.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Quickly convert your flashlight into a headlamp or mount it to your helmet. All you will need is two zipties and possibly some double sided tape. I suggest using a quality double sided tape like 3M's VHB and UV resistant zipties. If you don't have an elastic headband strap already you can use nylon webbing or even braided paracord in an emergency. The strap model can even be used on MOLLE vests or backpacks with a 90 * lights for another hands free option. When printed in ABS or PETG this can be left inside a vehicle. PLA is not recommended if being left inside a hot location or prolonged exposure to the sun. At 15 grams or less you can leave this in your hiking pack with little concern about the weight or amount of space needed. Also makes a great back up option if you use headlamps on a regular basis.
By changing the scaling on the X axis you can fit a variety of lights.
So far I have tested :
100% scale to fit
- Acebeam TAC AA
- Olight IR5 EOS
- Fenix E12
90% scale
- Acebeam M10
80% Scale
- Olight It3 EOS
I will be adding more to the list as I confirm the fit. If you do print this design please post a make the scale you used and what light it fits.
As always if you like my design please like and post a make.