LayersFactory
Zgłoś model
1 / 2
Ender 3 V3 KE/SE Auto Nozzle Cleaning Brush Mount — zdjęcie 1
1 / 2

Ender 3 V3 KE/SE Auto Nozzle Cleaning Brush Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Isaiah Tsoi

Isaiah Tsoi

@IsaiahTsoi_1875110

A mount under the print bed, allow auto cleaning the nozzle automatically.

Ocena
5 / 5
Polubienia
106
Pobrania
379
Wydruki
2
Wyświetlenia
2716
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Creality Parts & Upgrades
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 8)Remiksy (0)Kolekcje (142)Powiązane

 

Important Note

Consider remove the brush when you run the built-in self testing or bed mesh calibration. The z-offset result may be affected If your brush is too “tall” and block the extruder during the process.

Version supporting calibration is also available.

 

Credit

This is a remix model, taking the base from Ender 3 V3 KE Nozzle-Cleaning Brush Mount [UPDATED V2] and the mount from Ender 3 V3 KE and SE automatic nozzle cleaning brush.

The thumbscrew design was inspired by funbart's creation. You can view their original design here.

 

Changes

With side storage and handle at the front, I am not able to use both of the designer on my printer, so i remix them to suit my need.

The position of the brush is the same (or close to) the position of Ender 3 V3 KE and SE automatic nozzle cleaning brush.

 

Other parts needed

A M4 nut is needed for the thumbscrew.

 

Gcode

Please refer to the original post. 
 

Working with Bed Mesh Calibration (v3 update)

As I want to keep the bed mesh calibration in my start gcode, so I lowered the mount (v3), and modify the gcode accrodingly.

I am not really familiar with gcode, so I may have kept some unnecessary step here, but here for anyone who want need it for reference.

SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed
SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
M140 S[bed_temperature_initial_layer_single] ;Set bed temp
G28 X Y ;Home XY axes
M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize
G28 Z ;Home Z axis & load bed mesh
BED_MESH_CALIBRATE PROBE_COUNT=6,6 ;Auto bed level


M104 S[nozzle_temperature_initial_layer] ;Set nozzle temp
G92 E0 ;Reset Extruder
G1 X1 Y-18 Z3 F5000.0 ;Line up with brush
M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize


G1 X75 Y-18 Z-0.5 F5000.0 ;Wipe 1
G1 X30 Y-18 Z-0.5 F5000.0 ;Wipe 2
G1 X75 Y-18 Z-0.5 F5000.0 ;Wipe 3
G1 X30 Y-18 Z-0.5 F5000.0 ;Wipe 4
G1 X75 Y-18 Z-0.5 F5000.0 ;Wipe 5
G1 X30 Y-18 Z-0.5 F5000.0 ;Wipe 6
G1 X75 Y-18 Z-0.5 F5000.0 ;Wipe 7
G1 X30 Y-18 Z-0.5 F5000.0 ;Wipe 8


G1 X40 Y-18 Z15 F5000.0 ;Raise to clear brush 
G1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position


G1 Z0.2 ;Lower nozzle to printing height
G1 Y145.0 F1500.0 E15 ;Draw the first line
G1 X-1.7 F5000.0 ;Move to side a little
G1 Y30 F1500.0 E15 ;Draw the second line
G92 E0 ;Reset Extruder

Tagi

3dmodel3dprinter