Gridfinity 3x6 parkside crimping tool holder with additional storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity 3x6 container to store and display your parkside crimping tool as well as several little things.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 801
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Remix of "Gridfinity Parkside crimping tool 3x6" by xAqua
I appriciate the great work of xAqua. I just added several compartments to the original model for storing little things, to improve the usage of space.
If you preffer to display your tool without the additional compartments, please use the original design.
This model is as well available on
Model outer dimensions
The outer dimensions may be relevant to you, if you want to use this model without a gridfinity grid base.
- 25,2 cm length
- 11,8 cm width
- 1,6 cm height
Overview of additional compartments
The gridfinity project was released by Zack Freedman. - Kudos to Zack
Check out the gridfinity homepage and watch Zacks youtube video of gridfinity:
Gridfinity Tips!
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.