1 / 4
Suzuki Jimny SZ5 (Low Poly) glue fit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix intended to make printing with less support possible.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Share Alike
I remixed this model so it can be printed with less supports than the original.
To assemble the model, you will need to glue each part together. The small square hole in the wheels is off-center and should be facing downward. To attach the axles, you may need to sand them down so they fit properly into the square holes of the wheels.
Print one of each part, except for the wheels. Print those four times.
