1 / 10
#0072 [Remix] Prusa Enclosure Top Center Plug - PTFE Tube Gripper (Holder) X1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PRUSA Enclosure Top Center Plug with 1 hole for PTFE Tube Gripper.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v3.0
PRUSA Enclosure Top Center Plug with 1 hole for PTFE Tube Gripper.
Loved BuildX's remix- but I don't have a MMU... So I used Prusa Slicer's “Add slab” to plug 4 holes, and “remove slab” to cut out the 4 stems….. thereby reduced down to 1 hole...
So anyone wanting to run a spool from on top of the enclosure down into the printer- this is a good fix.
