Self Watering Pot rev.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The second iteration of a self watering pot I made earlier
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 301
- Wydruki
- 4
- Wyświetlenia
- 1145
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
The second iteration of a self watering pot I made earlier.
Many adjustments for printabitily and a completely parametrized F360 model. Almost fully customizable with parameters. See a screenshot for a full list. Notes in the user parameters section will help ya.
A few suggestions:
- Don't use PLA if you gonna use it anywhere near direct sunlight;
- Use either "random" or aligned seam alignment for a higher chance of water-tightness, as well as 101-104% flow.
- Printing orientation just like on the pictures and in the stls. Z up.
Step and f3d files are attached. Stls are lame.
Feel free to comment. Any criticism is welcome.By now comment section has also become FAQ of sorts. So you may find something useful there.And if you need something like this made or rendered for you, find me onUpwork
Category: Outdoor & Garden