Bambu X/P Series Poop Chute - Magnets, Supportless, Fit Without Looking
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a poop chute, how original. Mine's magnetic, supportless, and you can fit it in place by feel alone.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Shoutout to MilSpec Aviation for inspiring me with their “Bambulab P1S Poop Chute”. Not marked as a remix because I made mine from scratch and the models are quite different.
My Bambu P1S printer is tucked tightly in the corner of my room, so I wanted a chute that sticks to the back of the printer and could slide in and out of place without me being able to see back there.
This prints without support. The magnet holes are designed for four 6x2 circular magnets. I think I printed this with a 0.4 noz and 0.2 layers, but it's probably best to use the “variable layer height” option in your slicer to save time on most of the model but still get the magnet holes accurate.
