Baby Bouncer steering wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mix of steering wheels for baby bouncer
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 788
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I upgraded this Interactive steering wheel toy with levers (for toddlers) by Peter M and prepared two steering wheels your kid will love. Your child can now become not only a race driver but also a ship captain, or a B-29 Superfortress pilot! All you need is some 3D printed parts, a 625 bearing (or similar), a 40 mm long M5 bolt (or longer), an M5n Nyloc nut, and a super glue.
For both steering wheels, you'll need to print a frame from the original model by Peter M. The frame should be extended as my parts are significantly larger than the author's original steering wheel. I suggest slicing the original frame into smaller parts and adding at least extra 15 cm in height.