Backpack Hanger for Tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang your backpack and utilities wherever you want with a simply rope in less than 2 minutes.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the object you could not go out without it to your next journey.
This simply hanger only requires a rope and a spot to tie it. You can tie it around a tree, at a branch of it, or just in every spot where you could tie the rope. The best way to hang it is from a strong top branch - for no sliding down.
It allows you to hang almost every backapck model, your coat, some clothes you want to dry if they were wet, or you could just give it the use you want.
This tool is perfect for camping and forest excursions because it prevents insects, little animals and the humidity from the floor to reach your backpack. Futhermore, this is the best ecofriend way to hang your things in every place without damaging the nature because you don't have to do holes or break anything.
The hanger allows every type of rope under 14 mm of diameter - we recommend using climbing rope and a good knot.
---------------------------------------------------------------------------------------------------------
PRINTING ADVICES
ALWAYS print it in the position the model is designed (no supports required and so much better resistance propperties because of the layers direction and the traction efforts).
For a good resistance, we recommend printing it at least with 3 perimeters, 4 tops/bottoms and 10% infill.
The normal size is PROVED to resist 70kg with 5 perimeters/bottoms/tops and 10% infill and fuzzy skin for better looking.