1 / 7
Crosman 1377 adjustable buttstock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes crosman stock longer and also adjustable in height so you can adjust it to fit you perfectly.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 1160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
What this is:
Makes crosman stock longer so you dont have to bent to it if you are a little bit larger like me. You can also make it even longer by adding spacers between stages 1 and 2. Butt stock is also adjustable in height so you can adjust it to fit your shoulder perfectly.
Nice to combine with adjustable cheek rest.
You will need:
2xM5 screws (flat head)
- length depends on number of spacers (without them 15mm)
- connect parts 1 and 2
1xM5 screw (hex head)
- 15mm length (must not exceed 17mm or it will not work)
- connect buttStock to the shiftRail via via adjustWheel and slider
4xM5 hex nuts
- 5 mm high
3x zip ties
- connects part 1 to the crosman stock
- tighten them firmly (to avoid wobble)
Printing:
It is best to print in orientations as shown on the photo.
After Printing:
- you may need to file down the slot for the adjusting wheel a little bit
- you may also need to put a little bit of hot glue (or something) to the inside of "ears" of prat number 1