1 / 5
Nerf Trailblazer 9-shot short dart cylinder and stock attachment point. — zdjęcie 1
1 / 5

Nerf Trailblazer 9-shot short dart cylinder and stock attachment point.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

What it says on the tin. Read description for details on how to make the project yourself.

Ocena
0 / 5
Polubienia
11
Pobrania
41
Wydruki
0
Wyświetlenia
442
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Public Domain

Upgrade kit for nerf trailblazer to give it a 9-dart cylinder and (upside down) stock attachment point at the bottom of the grip. 

I highly recommend making cuts into the frame where the red lines are on the image attached in order to access the cylinder for easier loading. The print is separated into several pieces due to different print settings being ideal for each and in order to not put all your eggs in one basket in case a print fails. I would superglue the parts of the cylinder together upon successful testing, but it isn't required.

Recommended Print Settings:


Cylinder - Barrels:
- Layer height: 0.16mm max
- Supports: optional, but tree if being used

Cylinder - Cam:
- Layer Height: 0.12mm max
- Supports: tree supports HIGHLY recommended
- Infill: 100% recommended, the section that extends to connect to the barrels is vulnerable to snap otherwise

Everything else you can print at whatever settings you like.

Tagi