Carbon Filter for Saturn 4 Ultra (Port mounted, USB fan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a carbon filter for the Saturn 4 Ultra that mounts in through the rear port. It uses a USB fan.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 1682
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a carbon filter for the Saturn 4 Ultra that mounts in through the rear port. It uses a USB fan (so can be powered from the printer's USB port whenever the printer is on) and includes an easily removed and refilled "cartridge" that has cheaply obtainable fish tank activated carbon inside it.
The closing seal on the Saturn 4 Ultra's lid is poor, so this doesn't do a perfect job, but it does substantially reduce the smell of running the printer.
All parts can easily be printed (supportless) on an FDM printer, but I see no reason why it should be possible to print them on the Saturn 4 Ultra itself.
There is a full build guide on Instructables at https://www.instructables.com/Carbon-Filter-for-Saturn-4-Ultra-3d-Printed-USB-Fa/