1 / 5
Base for telescopic ladder / Fuß für Teleskopleiter — zdjęcie 1
1 / 5

Base for telescopic ladder / Fuß für Teleskopleiter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For pipe inner diameter 69 mm. Can be scaled in the slicer ---- Für Rohr Innen dm 69 mm . Kann im Slicer scaliert werden

Ocena
5 / 5
Polubienia
4
Pobrania
27
Wydruki
0
Wyświetlenia
126
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The Base for telescopic ladder should be printed from TPU due to slip resistance.

Wall lines - 7

Horizontal layers : Top 7 ( Rounded side) Bottom 1

Infill 20% Grid

Can be printed without support lines

--------------------------------------------------------------------------

Sollte wegen der Rutschfestigkeit aus TPU gedruckt werden.

Wand Linien - 7

Horizontale Schichten : Top 7 ( abgerundete Seite ) Bottom 1

Infill 20% Grid

Kann ohne Support Linien gedruckt werden

Tagi