1 / 2
Jackpot CNC Controller Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand alone case for the Jackpot CNC Controller
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 541
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I wanted to make a case to hold the Jackpot CNC Controller that was stand alone, and relatively compact. I am in the process of building a ROOT 4 Lite CNC and I needed something to hold the controller. This is definitely a V1 it could probably be improved upon. I haven't finished designing a lid yet as I still need to source a fan and some sort of window to see the LEDs on the board for troubleshooting.
- The holes are sized to use standard M3 hardware to self tap threads into the plastic.
- There are slots for zip ties to hold the wires clean and organized.
- You could make a lit with a piece of plexiglass, I haven't gotten to the lit part yet.