Glare Protector for X1 Light Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a very simple addition to Warpster's excellent Bambu Lab X1 LED Light Frame to remove reflected glare.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I suggest that it be printed in ABS as I do the rest of the frame - as Warpster suggests.
I printed the frame originally in PETG and it was fine printing PLA, but once I started printing ABS, the PETG sagged - so save yourself some time and go with ABS from the outset.
I glued the glare protector in place with a bit of contact cement, but any glue you would normally use on ABS will do just fine as this is a no-load component. The nice thing about contact cement is that you can reheat it a bit with a hot-air gun (not too much!) and it softens enough to pull apart again.