1 / 3
SV08 - Door T-Clip, holds the enclosure doors open .
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This small t-clip mounts atop the enclosure door, against the hinge, holds the door open during prints.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 124
- Wydruki
- 3
- Wyświetlenia
- 411
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (36)Powiązane
A small bracket to keep the doors open and secure on the SV-08's enclosure from Sovol.
Recommended settings:
Line width: 0.4 or 0.5
Layer height: 0.2
Walls: 3
Top/bottom layers: 5 or more
Infill: 20%
Wall Generator: Arachne or Normal (Prusa Slicer/Orca), Normal or Adaptive (Cura)
Material: PLA+ or PETG