1 / 6
PTFE Tube Guide for VIVO Steel Multi-Roll Filament Holder — zdjęcie 1
1 / 6

PTFE Tube Guide for VIVO Steel Multi-Roll Filament Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Created this clamping guide for 1-6 PTFE tubes on the VIVO Steel Filament Holder.

Ocena
0 / 5
Polubienia
7
Pobrania
25
Wydruki
0
Wyświetlenia
268
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is is a guide for up to 6 PTFE tubes for the clamping VIVO Steel Filament Holder. I like this holder as it keeps the rolls out of the way, but the tubes were not managed well with this setup for me. I created this to guide the tubes a bit and keep them out of the way. 

 

It works pretty well with some left over M3 Bolts(35mm) and M3 square nuts pulled into the part. I also put two layers of electrical tape inside the “clamp” to give it to some grip on the pole. 

 

This should be sized well to fit on Mk3s/Mk4s without modification. 

Tagi