Nami Burn-E (2) Nalgene Bottle Holder

UPDATE: i tested the original holder and the bottle was flopping around a lot so I added a second hole for a strap near the top part. This was tested and it works flawlessly now. Great hold and no chance of bottle coming out even on rough rides. Make sure its printed on its side because it could snap (ask me how I know) at layer line if printed straight up and down.

Nalgene Bottle Holder For Nami Burn E

• This is a Nalgene bottle holder for the Nami Burn-e or Burn-e2. It combines two different model to make a new product altogether.
  
  I used Nami Burn-e JBL speaker mount from thingiverse and Nalgene Bottle Cage from on printables.
  
  The holder itself is printed in PETG and the mounts are printed in TPU. I printed it on its side without supports. The parts form fit together; gluing the parts it highly recommended but not required. It is held together and onto the scooter via zip ties. 
  
  A strap loops through the holder to keep the bottle secure and in place while riding. I used a velcro strap, I ordered a bunch off Amazon. It was tricky to get through - i had to re-purpose a paperclip to have a small hook where I attached the strap to and fed the paperclip through the hole, otherwise I couldn't get the strap through.
  
  Keep in mind when printing there are two different TPU mount files and each one is required. The bottom and top both have different spacing. I apologize for the fragments left on the model - I'm an amateur modeler at best; they will need to be cut away.
  
  
  Happy Printing.