Talentcell PB120B1 Clamp On Bracket for Skywatcher AZ-GTI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I combined a file for a 30mm clamp onto a top and bottom holder for the talentcell PB120B1 to fit the Shywatcher AZ-…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I combined a file for a 30mm clamp onto a top and bottom holder for the talentcell PB120B1 to fit the Shywatcher AZ-GTI tripod legs. It is quick install and quick release for easy movement.
Print Settings
Printer Brand:
Sovol
Printer:
SV04
No
Supports:
No
1.5
Infill:
100
After printing, You will need to cut the hinge and clip lines into the section that was stuck to the build plate. It went very easy for me with a hobby knife. Once you score it, it will open. I used a brim to print as well.
How I Designed This
Took an existing clip file and attached it to mounts for the talentcell..
Category: Parts