Case for Tonuino, the Toniebox Replica
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really loved the Tonuino by Mr. Voß: https://www.voss.earth/tonuino/ (German) It is a mp3 player where the tracks…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 1755
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really loved the Tonuino by Mr. Voß: https://www.voss.earth/tonuino/ (German)
It is a mp3 player where the tracks are triggered by a nfc card. The audio files are stored on a micro sd card.
Here is my enclosure for all the components. The goal was to provide screwless places for (almost) all components.
BOM:
- Visaton FR 10 https://www.amazon.de/gp/product/B003A63NLE (any other speaker with 10cm diameter should work)
- Mini RC522 RFID Reader https://www.aliexpress.com/item/33024803665.html
- DFPlayer Mini https://www.aliexpress.com/item/4000464600377.html
- USB Type C Li-Ion charger TP4056 https://www.aliexpress.com/item/32649780468.html
- Arduino Nano https://www.aliexpress.com/wholesale?SearchText=Arduino+Nano
- 26650 Protected Li-Ion Battery
- 5V boost converter
- 3* Arcade Buttons 24mm https://www.aliexpress.com/item/33029433051.html
- 1K Resistor
- Cables
- 4 M5 Screws
- 8 M3 Screws
Switch 12mm* 19mm I hope i did not forgot anything.
Software: https://github.com/xfjx/TonUINO
Fork with the feature that the playback stops if the card is taken away: https://github.com/mcgreg1/TonUINO (i use this)
The charging board gets installed upside down. This way you can see the led indicators through 2 tiny holes in the enclosure.
I used pin connectors but i had some troubles with it due to too high contact resistance. I recommend to solder all connections.
Thanks to Thorsten Voß.