(tr)uKnob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the true micro knob for the (tr)uSDX
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 361
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
There are a few knob designs out there for the (tr)uSDX but I could not find one small enough for what I wanted to do so I made this one. It does require some modification to the rotary encoder component.
It has a thin arm that you can use to spin the dial, but also a knurled knob for press and turning for volume and menu select.
Here is a quick video showing "spinning the dial"
I spent a considerable amount of time with a Dremel trying to get this to press fit on just right. In hindsight, you can probably just heat up the inside of the knob with a soldering iron and then pressing it onto a shorted encoder shaft.