Bose A20 control mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom molded mount for the Bose A20 control box. Uses a sliding dovetail attachment.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 202
- Wydruki
- 1
- Wyświetlenia
- 1382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bose A20 (TM) control box mount.
Attach the dovetail mount with the curve pointed up either by drilling and tapping for flush-fit screws or by using your favorite double-sided adhesive. Then slide the mount itself onto the dovetail.
If your printer is tuned well, it will slip on and tighten down because the dovetail is tapered. If your printer is less-tuned, you will need to do some adjusting to the dovetail to make it fit nicely. On my printer I printed it at 102% on Z-axis and 97% across the narrow axis and it worked perfectly.
The GIF shows a red v1 version. The black one is the uploaded v3 version.