1 / 2
Solenoid Parts for the MHP LMG
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solenoid ready parts for my lmg design, instead of the gearbox.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 741
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (17)Powiązane
These are just (mostly untested) parts for putting in an ftw solenoid. You'll need to use lighter springs in the pawl and retainer, as well as a spring to go around the pusher. It's a bit different, but it worked, just with a slow rate of fire, or semi auto if you don't have some sort of full auto mech. It won't have as much power to cycle the belt, and that could cause you issues. Probably good for anyone attempting a brushless remix.