1 / 2
Super Supported Blades for Windmill Wind Turbine by dwbmb
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very well-supported blades of the beautiful Windmill wind turbine from dwbmb.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 546
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the blades, but some movement caused a few odd ridges. I thought about slowing things down but the print time went off the charts. So, I moved things around and added some supports. It printed great! I should have taken a picture of the print before breaking the parts out, but I DID take a picture after I snapped them out. Took a few seconds. This is printed with Overture PEGT at .15 layer height at the quality speeds. "0.15mm QUALITY @MK3" at 15% infill.