Tall drawers for 3x4 gridfinity storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple pair of drawers in a unit with inbuilt 3x4 gridfinity base plates
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have my spare bambu parts/tools stored in gridfinity bins - together they cover about 2 baseplates at 4x3 size.
I wanted to store them under cover and stacked to keep the dust out - so I looked at drawers - but - some of the stored parts on one of the plates were just too tall for most of the drawer builds I found online.
Not by much - I just needed them slightly taller - so here they are.
I sized both drawers the same height - so I'm able to move the taller items to either drawer (and only needed one model file).
Print drawers right side up - no supports needed.
Flip drawer holder/shelf on its back for printing.