Modular socket holder for 3/8 and 1/4 drives
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
similar design to popular socket holders on the market, that can be printed for fraction of the price
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 1068
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
similar design to popular socket holders. I suggest printing the pegs in a brighter color of filament than the base. I painted mine but plan to reprint dual color soon
I used 15% infill, 3 outer layers printed at .2 height on a prusa mini with PLA and superglued 10mmx2mm magnets into the bottom.
I suggest printing the spacers without a brim if you can, something about printing these with a brim made the tolerances really tight.
If I were to remake these i would go with a larger magnet like a 15mmx3mm just for some more holding power, but the 10x2 work fine as long as you don't have too thick of a mat under them