Duet3D PanelDue 7i angled Case with integrated SD-Slot to mount on a 3030 Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Case to mount the PanelDue 7i by Duet3D on a 3030 Extrusion. It is angled at 25° to give the best view when…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a Case to mount the PanelDue 7i by Duet3D on a 3030 Extrusion. It is angled at 25° to give the best view when mounted. All buttons are accesible (reset; erase). The reset-button is easy to press and for the erase button, you will need a pen. I also integrated a hole to access the SD-Slot. (as the Panel is mounted with a little offset to compensate possible manufacturing tolerances it had to be designed a little wider than needed.)
Print Settings
Printer:
Hypercube Evolution
Rafts:
No
Yes
Resolution:
0.2
30%
Notes:
Support is only needed on the SD-Slot. Print it aligned with the front on the heatbed.
Category: 3D Printer Accessories