McLaren F1 Lego Speed Car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a complete replica of the McLaren F1 Lego Speed set 76919
- Ocena
- 0 / 5
- Polubienia
- 58
- Pobrania
- 483
- Wydruki
- 1
- Wyświetlenia
- 3137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a complete replica of the McLaren F1 Lego Speed set 76919.
I recommend to scale the lego's to at least 200% to print all parts more easily.
Almost all bricks can be printed without supports, oriented with their bottom on the build plate. Or logically try to orient to get the least amount of support necessary. Only bricks with a stepped profile, that cross multiple lego layers, need support.
I reccomend to print with a brim to make sure bricks stay in place because contact area with the print bed is quite limited.
Each brick is included seperately in a folder with their appropriate color. The brick's name includes how many times you will need to print them.
The instructions of the original lego set are included as PDF. Also the stickers are included, but they are not that easy to scale (their standarf format is not even the correct scale for the normal sized set). You will have to manually insert them in a word document and scale them according to the scale you used for the bricks.
When assembling the set, most parts will fit together nicely and quite firm. Other parts will not stay together and require a little bit of glue!
Note: some bricks will have a fault in their ‘knobs’ and they will not be printed properly. However, they will print well enough for you to use them.
Hope you enjoy the set! It took me quite some time to get all the parts together and print them, but I had a lot of fun doing so!