1 / 2
Schwamm und Bürstenhalterung / Sponge and brush holder — zdjęcie 1
1 / 2

Schwamm und Bürstenhalterung / Sponge and brush holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Halterung für Küchenschwämme und Bürste

Ocena
0 / 5
Polubienia
3
Pobrania
44
Wydruki
0
Wyświetlenia
308
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

Holder for sponge and brush
 

Perforated base for good drying of the sponges, easy to clean.

The two hooks are glued to the wall in a suitable place with double-sided adhesive tape. The container is best printed in PETG, the holders to be glued are made of PLA for good adhesion of the double-sided tape. Be sure to use waterproof tape and glue according to the instructions.

Halterung für Schwamm und Bürste

Boden gelocht für gute Trocknung der Schämme, einfach zu reinigen.

Die beiden Haken werden an geeigenter Stelle mit doppelseiteigem Klebeband an die Wand geklebt. Das Gefäss am besten in PETG drucken, die zu klebenden Halter aus PLA für gute Haftung des doppelseitigen Tapes. Unbedingt wasserfestes Tape verwenden und gemäss Anleitung festkleben.

Tagi